BRAKE HOSE RENAULT R4 MASTER CYLINDER DOUBLE CIRCUIT 4 OUTPUTS

Brake hoses for master cylinder with 4 outlets for RENAULT R4

Pipe kit including 8 pieces :

0- Additive copper brake hose for 4 outlets
From the master cylinder to the distributor:
Convex fitting (large grooved fitting on master cylinder side)
Concave fitting (small fitting) on the distributor side

1- From the master cylinder to the right front hose:
Convex connection (with groove) on master cylinder side
Concave connection on hose side

2- From the master cylinder to the left front hose :
Convex connection (with groove) on master cylinder side
Concave connection on the hose side

3- From the master cylinder to the distributor :
Convex connection (with groove) on master cylinder side
Concave connection on the distributor side

4- From the distributor to the left rear hose :
Concave connection on both sides

5- From the distributor to the right rear hose:
Concave connection on both sides

6 and 7- Rear arm tubes :
Concave connection on both sides

Advice for use :
- Carefully unroll the hoses and straighten them if necessary with a rubber mallet.
- Shape the hoses in the same way as the old hoses. Use a file handle or a tube to make the hangers.

Made of 3/16 copper according to NF en 12735-1.
Turned brass fittings adapted to the diameters of the accessories.
Delivered sealed with plastic plugs, each pipe is marked for easy assembly.
Delivered in a plastic bag.