MANIFOLD 4070 - EXHAUST MANIFOLD PAINT
RestomCollector 4070 (ex PCE 4070) is recommended for the decoration and corrosion protection of car exhaust manifolds.
RestomCollector 4070 is applied with a brush on sandblasted (cast iron) or microblasted (aluminium) headers in 2 or 3 coats depending on the roughness of the support (the hold on tube tailpipes is not as long-lasting). For tailpipes without a collector (direct tubes), we cannot guarantee the hold on the first centimetres, just after the engine outlet.
A preparation by brushing is insufficient to ensure a good durability
The curing is obtained during the first motor start-ups. After curing, RestomCollector 4070 is not sensitive to oil or petrol.
Available colours: ALU-GREY. Not available in black because the black pigment reduces the heat resistance.
Packaging: 250 ml pack (suitable for approx. 1/2 m2 in 3 coats).
Public Price:
€34.90Privilege card price:
€34.90Your Price :
You might also like
SUPERKIT 5-15 - SUPER KIT TANK TREATMENT 5-15 LITRES
Public Price:
€62.90Privilege card price:
€62.90Your Price :
PMV 3030 A - ALUMINIUM GREY ENGINE PAINT
Public Price:
€31.90Privilege card price:
€31.90Your Price :
SBF L-490 1 L. - SILICONE BRAKE FLUID 1 LITRE
Public Price:
€64.90Privilege card price:
€64.90Your Price :
SUPERKIT 25-40 - SUPER KIT TANK TREATMENT 25-40 LITRES
Public Price:
€84.90Privilege card price:
€84.90Your Price :
PMV 3030 R - RED ENGINE PAINT
Public Price:
€31.90Privilege card price:
€31.90Your Price :
PMV 3030 V - GREEN ENGINE PAINT
Public Price:
€31.90Privilege card price:
€31.90Your Price :
PMV 3030 N - BLACK ENGINE PAINT
Public Price:
€31.90Privilege card price:
€31.90Your Price :
Description
RestomCollector 4070 (ex PCE 4070) is recommended for the decoration and corrosion protection of car exhaust manifolds.
RestomCollector 4070 is applied with a brush on sandblasted (cast iron) or microblasted (aluminium) headers in 2 or 3 coats depending on the roughness of the support (the hold on tube tailpipes is not as long-lasting). For tailpipes without a collector (direct tubes), we cannot guarantee the hold on the first centimetres, just after the engine outlet.
A preparation by brushing is insufficient to ensure a good durability
The curing is obtained during the first motor start-ups. After curing, RestomCollector 4070 is not sensitive to oil or petrol.
Available colours: ALU-GREY. Not available in black because the black pigment reduces the heat resistance.
Packaging: 250 ml pack (suitable for approx. 1/2 m2 in 3 coats).