ADAPTABLE RUNNER RENAULT R4 FOR 4 WINDOWS PLASTIC FRAME

Adaptable slide for RENAULT R4

Slider to be mounted on all four windows for plastic frames.

This kit includes: the flocked window runner and the rubber cover profile for the four windows.

Dismantling instructions :
1/ Unstaple the frame.
2/ Remove the door frame.
3/ Remove the glass panes.
4/ Remove the runner from its plastic support.
5/ Clean the glass and slide support assembly with water and a non-aggressive product such as washing-up liquid. Then dry the assembly well.

Assembly instructions :
1/ Place the slide rail at the bottom, starting from the water drain hole.
2/ When the end of the glass closer guide rail is reached, insert the rubber profile under the runner and continue to fill the assembly until the beginning of the glass closer guide rail. Then continue with the runner only until you reach the water drainage hole.
3/ It is possible to make openings in the other two drainage holes.
4/ To maintain the sliding joint, it is possible to apply two points of polyurethane adhesive.
5/ Replace the windows.
6/ Replace the frame in its housing on the door.
7/ Fit the staples (reference: AGRAFE008), not included in the kit.